Convert cubic inch/minute [in^3/min] to acre-foot/hour [ac*ft/h] Online | Free flow Converter

Cubic Inch/Minute [in³/min]

Cubic inch per minute [in³/min] is a unit of volumetric flow rate that measures the volume of fluid or material passing through a system every minute, based on the cubic inch. One cubic inch equals approximately 16.387 milliliters. Expressed per minute, in³/min is commonly used in laboratory experiments, medical dosing, microfluidics, and small-scale industrial processes where precise control of low flow rates is required. For example, in a chemical laboratory, a solution may be delivered at 50 in³/min to maintain accurate reaction conditions over time. In medical applications, infusion devices or nutrient delivery systems may regulate fluids at in³/min to ensure patient safety and dosage precision. In industrial micro-dosing or lubrication systems, this unit allows operators to maintain consistent small-volume flows for efficiency and product quality. Compared to in³/h, cubic inch per minute provides higher temporal resolution, enabling near real-time monitoring and immediate adjustments. Using cubic inches per minute enables scientists, engineers, and technicians to measure, monitor, and optimize fluid or material flow, ensuring operational accuracy, safety, and reliability in laboratory, medical, and precision industrial applications.

Hour [ac·ft/h]

Acre-foot per hour [ac·ft/h] is a unit of volumetric flow rate commonly used in hydrology, irrigation, and water resource engineering. One acre-foot represents the volume of water needed to cover one acre of land to a depth of one foot, approximately 1,233 cubic meters or 325,851 gallons. When expressed per hour, ac·ft/h measures the water volume delivered, consumed, or flowing through a system within a single hour. This unit is particularly useful for managing high-capacity water distribution systems, including canals, reservoirs, and municipal or industrial supply networks, where monitoring short-term flow is essential. For example, a hydroelectric dam releasing 10 ac·ft/h discharges enough water to cover ten acres to a depth of one foot every hour, assisting operators in controlling water levels and power generation. It is also applied in flood control, irrigation scheduling, and industrial water use where precise flow rates are critical. Compared to ac·ft/d or ac·ft/y, acre-foot per hour provides finer temporal resolution, allowing for rapid adjustments and better system management. Using ac·ft/h enables engineers and water managers to monitor, regulate, and optimize water flow, ensuring efficiency, safety, and sustainability in diverse water resource applications.