Convert gallon (UK)/minute to cubic foot/second [ft^3/s] Online | Free flow Converter

Minute [gal (UK)/min]

Gallon per minute (UK) [gal (UK)/min] is a unit of volumetric flow rate that measures the volume of liquid passing through a system every minute, using the UK (Imperial) gallon as the standard. One UK gallon equals approximately 4.546 liters, so gal (UK)/min quantifies the amount of fluid flowing in sixty seconds. This unit is commonly used in industrial processes, water supply systems, chemical dosing, and irrigation systems where rapid or high-volume flow rates must be monitored and controlled. For example, in municipal water networks, gal (UK)/min is used to design pipelines and pumps to deliver sufficient water during peak demand. In industrial applications, it regulates the flow of liquids in processes such as cooling, chemical mixing, or fuel transfer to maintain efficiency and safety. Irrigation systems also use this unit to ensure crops receive adequate water quickly. Compared to gal (UK)/h, gallon per minute allows for real-time monitoring and finer control of fluid flow, making it suitable for systems that require immediate adjustments. Using gal (UK)/min enables engineers, technicians, and operators to measure, manage, and optimize fluid transport effectively, ensuring reliability, safety, and operational efficiency in both industrial and municipal contexts.

Foot/Second [ft³/s]

Cubic foot per second [ft³/s] is a unit of volumetric flow rate that measures the volume of fluid or material passing through a system every second, based on the cubic foot. One cubic foot equals approximately 28.3168 liters. Expressed per second, ft³/s is commonly used in hydrology, water resource management, industrial processes, and large-scale fluid systems where high flow rates must be monitored and controlled in real time. For example, in river discharge or dam release studies, a flow of 50 ft³/s represents 50 cubic feet of water passing a point each second, allowing engineers to manage flood risks and water supply efficiently. In industrial settings, it can be used to monitor large-scale liquid, slurry, or gas flows to ensure operational efficiency and prevent system overload. Compared to ft³/min or ft³/h, cubic foot per second provides instantaneous measurement and high-resolution control, enabling immediate adjustments to changing conditions. Using cubic feet per second allows engineers, hydrologists, and operators to measure, regulate, and optimize volumetric flow, ensuring safety, efficiency, and reliability in municipal, industrial, and environmental applications.