Convert kilogram/second (Gasoline at 15.5%b0C) to acre-foot/hour [ac*ft/h] Online | Free flow Converter

Kilogram/Second (Gasoline at 15.5°C) [kg/s]

Kilogram per second [kg/s] is a unit of mass flow rate that measures the mass of a substance passing through a system every second. When specified for gasoline at 15.5°C (approximately 60°F), it accounts for the density of gasoline under standard conditions, which is about 0.725 g/cm³. Expressed in kg/s, this unit is widely used in fuel injection systems, industrial fuel delivery, and engine performance analysis where precise real-time measurement of fuel mass is critical. For example, an engine consuming 1.2 kg/s of gasoline can be analyzed to optimize combustion efficiency, reduce emissions, and improve overall performance. In pipelines or storage systems, kg/s allows operators to monitor rapid mass transfer, prevent overflows, and maintain system stability. Compared to kg/min or kg/h, kilogram per second provides high-resolution, real-time monitoring, enabling immediate adjustments to fuel flow for optimal operation. Using kg/s for gasoline at 15.5°C allows engineers, technicians, and operators to measure, control, and optimize fuel mass flow, ensuring efficient combustion, precise dosing, and safe handling in automotive, industrial, and energy applications where fuel performance and consistency are crucial.

Hour [ac·ft/h]

Acre-foot per hour [ac·ft/h] is a unit of volumetric flow rate commonly used in hydrology, irrigation, and water resource engineering. One acre-foot represents the volume of water needed to cover one acre of land to a depth of one foot, approximately 1,233 cubic meters or 325,851 gallons. When expressed per hour, ac·ft/h measures the water volume delivered, consumed, or flowing through a system within a single hour. This unit is particularly useful for managing high-capacity water distribution systems, including canals, reservoirs, and municipal or industrial supply networks, where monitoring short-term flow is essential. For example, a hydroelectric dam releasing 10 ac·ft/h discharges enough water to cover ten acres to a depth of one foot every hour, assisting operators in controlling water levels and power generation. It is also applied in flood control, irrigation scheduling, and industrial water use where precise flow rates are critical. Compared to ac·ft/d or ac·ft/y, acre-foot per hour provides finer temporal resolution, allowing for rapid adjustments and better system management. Using ac·ft/h enables engineers and water managers to monitor, regulate, and optimize water flow, ensuring efficiency, safety, and sustainability in diverse water resource applications.