Btu (IT) per Second per Square Foot [Btu(IT)/(s·ft²)]

The unit Btu (IT) per second per square foot, written as Btu(IT)/(s·ft²), measures heat flux density or thermal power per unit area in the Imperial system using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every second.

This unit is commonly used in high-intensity heat transfer applications, solar energy studies, and engineering where energy flux per small surface area is important. Typical applications include:

• 
  

  Heat flux from industrial furnaces or heaters

  
  
• 
  

  Solar radiation incident on small surfaces

  
  
• 
  

  Thermal testing of materials

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in Btu(IT)/(s·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in seconds.

Conversion to SI units:

While W/m² is the SI standard, Btu(IT)/(s·ft²) is convenient in U.S. engineering and historical references, providing an intuitive measure of high-intensity heat flux per square foot per second.

Kilowatt per Square Meter [kW/m²]

The unit kilowatt per square meter (kW/m²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time, scaled to kilowatts. One kilowatt equals 1000 watts, so 1 kW/m² = 1000 J of energy passing through 1 square meter every second.

This unit is widely used in solar energy, fire safety engineering, and high-intensity thermal applications to quantify power delivered per area. Typical applications include:

• 
  

  Solar concentrators and photovoltaic panels: assessing the intensity of sunlight on a surface

  
  
• 
  

  Fire testing: measuring heat flux from flames or radiative heaters

  
  
• 
  

  Industrial processes: calculating energy input in furnaces or reactors

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kW/m², Q is energy in kilojoules, A is area in square meters, and t is time in seconds.

For reference, direct sunlight at noon on a clear day provides roughly 1 kW/m² at the Earth’s surface.

kW/m² is an SI-derived unit and is convenient for large-scale energy calculations, replacing older units like Btu/ft²·h or cal/cm²·s. It provides a straightforward way to assess power per unit area in engineering and environmental applications.