Btu (th) per Second per Square Foot [Btu(th)/(s·ft²)]

The unit Btu (th) per second per square foot, written as Btu(th)/(s·ft²), measures heat flux density or thermal power per unit area using the thermochemical British Thermal Unit (1 Btu(th) = 1054.35 J). It represents the amount of heat energy transferred through 1 square foot of surface every second.

This unit is commonly used in high-intensity heat transfer applications, industrial processes, solar energy studies, and material testing, especially where energy flux over relatively large surfaces is significant. Applications include:

• 
  

  Heat flux from furnaces, radiators, or heaters

  
  
• 
  

  Solar radiation received by panels or flat surfaces

  
  
• 
  

  Thermal testing of building or industrial materials

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in Btu(th)/(s·ft²), Q is energy in Btu(th), A is area in ft², and t is time in seconds.

Conversion to SI units:

Although W/m² is the SI standard, Btu(th)/(s·ft²) remains useful in U.S. engineering, thermal studies, and historical literature, providing an intuitive measure of high-intensity heat flux per square foot per second.

Kilocalorie (IT) per Hour per Square Meter [kcal(IT)/(h·m²)]

The unit kilocalorie (IT) per hour per square meter, written as kcal(IT)/(h·m²), measures heat flux density or thermal power per unit area using the International Table kilocalorie (1 kcal(IT) = 4186.8 J). It represents the amount of heat energy transferred through 1 square meter of surface in 1 hour.

This unit is often used in building engineering, HVAC, and solar energy studies to quantify energy transfer through walls, roofs, or solar collectors. Typical applications include:

• 
  

  Heat gain or loss through building surfaces

  
  
• 
  

  Solar energy incident on rooftops or flat surfaces

  
  
• 
  

  Design of heating and cooling systems

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kcal(IT)/(h·m²), Q is total heat in kilocalories, A is area in m², and t is time in hours.

Conversion to SI units:

Although SI units such as W/m² are now standard, kcal(IT)/(h·m²) remains useful in legacy building and thermal engineering literature, providing an intuitive measure of energy transfer over time in kilocalories.