Calorie (th) per Hour per Square Centimeter [cal(th)/(h·cm²)]

The unit calorie (th) per hour per square centimeter, written as cal(th)/(h·cm²), measures heat flux density or thermal power per unit area using the thermochemical calorie (1 cal(th) = 4.184 J). It represents the amount of heat energy transferred through 1 cm² of surface in 1 hour.

This unit is often used in solar energy studies, calorimetry experiments, and building physics, especially when small surface areas and long durations are considered. Typical applications include:

• 
  

  Solar radiation incident on small surfaces

  
  
• 
  

  Thermal testing of materials over time

  
  
• 
  

  Calorimetry experiments

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in cal(th)/(h·cm²), Q is energy in calories, A is area in cm², and t is time in hours.

Conversion to SI units:

While SI units such as W/m² are standard, cal(th)/(h·cm²) remains convenient in small-scale laboratory and historical studies, providing an intuitive way to quantify energy transfer per hour per unit area.

Btu (IT) per Hour per Square Foot [Btu(IT)/(h·ft²)]

The unit Btu (IT) per hour per square foot, written as Btu(IT)/(h·ft²), measures heat flux density or thermal power per unit area using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every hour.

This unit is widely used in U.S. building construction, insulation, HVAC, and solar energy studies to quantify energy transfer through walls, roofs, or floors. Typical applications include:

• 
  

  Heat loss or gain through building surfaces

  
  
• 
  

  Solar radiation incident on horizontal surfaces

  
  
• 
  

  Design and analysis of heating and cooling systems

  
  

Heat flux is mathematically expressed as:

where q is heat flux in Btu(IT)/(h·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in hours.

Conversion to SI units:

Although modern practice uses W/m², Btu(IT)/(h·ft²) remains prevalent in U.S. building codes, insulation tables, and historical thermal data, offering a convenient measure of energy transfer per square foot per hour.