Calorie (th) per Minute per Square Centimeter [cal(th)/(min·cm²)]

The unit calorie (th) per minute per square centimeter, written as cal(th)/(min·cm²), measures heat flux density or thermal power per unit area using the thermochemical calorie (1 cal(th) = 4.184 J). It represents the amount of heat energy transferred through 1 cm² of surface every minute.

This unit is often used in laboratory experiments, solar energy studies, and material testing, particularly when small surfaces and longer exposure times are involved. Applications include:

• 
  

  Solar radiation measurements on small panels or surfaces

  
  
• 
  

  Thermal testing of materials over extended periods

  
  
• 
  

  Calorimetry experiments on small samples

  
  

Mathematically, the heat flux is expressed as:

where q is heat flux in cal(th)/(min·cm²), Q is energy in calories, A is area in cm², and t is time in minutes.

Conversion to SI units:

Although SI units such as W/m² are standard, cal(th)/(min·cm²) remains useful in historical calorimetry, laboratory experiments, and solar radiation studies, providing an intuitive measure of energy transfer per minute per small surface area.

Btu (IT) per Second per Square Foot [Btu(IT)/(s·ft²)]

The unit Btu (IT) per second per square foot, written as Btu(IT)/(s·ft²), measures heat flux density or thermal power per unit area in the Imperial system using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every second.

This unit is commonly used in high-intensity heat transfer applications, solar energy studies, and engineering where energy flux per small surface area is important. Typical applications include:

• 
  

  Heat flux from industrial furnaces or heaters

  
  
• 
  

  Solar radiation incident on small surfaces

  
  
• 
  

  Thermal testing of materials

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in Btu(IT)/(s·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in seconds.

Conversion to SI units:

While W/m² is the SI standard, Btu(IT)/(s·ft²) is convenient in U.S. engineering and historical references, providing an intuitive measure of high-intensity heat flux per square foot per second.