Erg per Hour per Square Millimeter [erg/(h·mm²)]

The unit erg per hour per square millimeter, written as erg/(h·mm²), measures energy flux density or power per unit area using the cgs system. An erg is defined as the energy required to move 1 dyne over 1 centimeter, or 1 erg = 10⁻⁷ joules. Dividing by hour and mm² provides the rate of energy transfer per small area over time.

This unit is typically used in laboratory-scale physics, radiation experiments, and surface energy studies where small areas and low energy transfers are involved. Applications include:

• 
  

  Measuring radiation incident on tiny surfaces

  
  
• 
  

  Calorimetry experiments on small samples

  
  
• 
  

  Micro-scale energy transfer studies in materials science

  
  

Heat or energy flux can be expressed mathematically as:

where q is energy flux in erg/(h·mm²), E is energy in ergs, A is area in mm², and t is time in hours.

Conversion to SI units:

While largely of historical or specialized use, erg/(h·mm²) provides a convenient cgs-based measure for micro-scale, low-intensity energy transfer in scientific experiments.

Btu (IT) per Second per Square Foot [Btu(IT)/(s·ft²)]

The unit Btu (IT) per second per square foot, written as Btu(IT)/(s·ft²), measures heat flux density or thermal power per unit area in the Imperial system using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every second.

This unit is commonly used in high-intensity heat transfer applications, solar energy studies, and engineering where energy flux per small surface area is important. Typical applications include:

• 
  

  Heat flux from industrial furnaces or heaters

  
  
• 
  

  Solar radiation incident on small surfaces

  
  
• 
  

  Thermal testing of materials

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in Btu(IT)/(s·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in seconds.

Conversion to SI units:

While W/m² is the SI standard, Btu(IT)/(s·ft²) is convenient in U.S. engineering and historical references, providing an intuitive measure of high-intensity heat flux per square foot per second.