Kilocalorie (IT) per Hour per Square Meter [kcal(IT)/(h·m²)]

The unit kilocalorie (IT) per hour per square meter, written as kcal(IT)/(h·m²), measures heat flux density or thermal power per unit area using the International Table kilocalorie (1 kcal(IT) = 4186.8 J). It represents the amount of heat energy transferred through 1 square meter of surface in 1 hour.

This unit is often used in building engineering, HVAC, and solar energy studies to quantify energy transfer through walls, roofs, or solar collectors. Typical applications include:

• 
  

  Heat gain or loss through building surfaces

  
  
• 
  

  Solar energy incident on rooftops or flat surfaces

  
  
• 
  

  Design of heating and cooling systems

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kcal(IT)/(h·m²), Q is total heat in kilocalories, A is area in m², and t is time in hours.

Conversion to SI units:

Although SI units such as W/m² are now standard, kcal(IT)/(h·m²) remains useful in legacy building and thermal engineering literature, providing an intuitive measure of energy transfer over time in kilocalories.

Btu (IT) per Minute per Square Foot [Btu(IT)/(min·ft²)]

The unit Btu (IT) per minute per square foot, written as Btu(IT)/(min·ft²), measures heat flux density or thermal power per unit area using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every minute.

This unit is commonly used in U.S. building engineering, solar energy studies, and thermal analysis where energy flux per unit area over longer periods is considered. Typical applications include:

• 
  

  Heat loss or gain through building walls, roofs, and floors

  
  
• 
  

  Solar radiation incident on panels or horizontal surfaces

  
  
• 
  

  Industrial heating or cooling rate analysis

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in Btu(IT)/(min·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in minutes.

Conversion to SI units:

While SI units such as W/m² are now standard, Btu(IT)/(min·ft²) remains convenient in U.S. engineering and historical thermal literature, providing an intuitive measure of heat transfer per square foot per minute.