What is a length converter?

A length converter helps you convert between different units of length quickly and accurately.

How do I convert chain to mil?

Simply enter the value in the chain input field, and the converter will show you the equivalent value in mil instantly.

Is this length converter free to use?

Yes, this length converter is completely free and easy to use for all your conversion needs.

Can I switch between chain and mil easily?

Yes, there is a switch button provided to quickly swap the conversion direction between chain and mil.

How accurate are the conversion results?

The conversion results are calculated using precise formulas to ensure accuracy for most practical purposes.

Convert chain to mil Online | Free Length Converter

Chain

A chain is a unit of length traditionally used in land surveying. The most common version is the Gunter’s chain, which equals 66 feet or 22 yards, approximately 20.1168 meters.

The chain was introduced by English clergyman Edmund Gunter in the 17th century to simplify land measurement. One chain consists of 100 links, each 0.66 feet long. It became a standard unit in British and American land surveying and was instrumental in defining land areas, especially in the U.S. Public Land Survey System.

Key Conversions:

1 chain = 66 feet
1 chain = 22 yards
1 chain ≈ 20.1168 meters
10 chains = 1 furlong
80 chains = 1 mile

Though now largely replaced by metric units and modern surveying tools, the chain still appears in older land deeds, maps, and rural property descriptions.

Mil

A mil is a unit of length commonly used in engineering and manufacturing to measure very small distances, especially thicknesses. It is equal to one-thousandth of an inch (0.001 inch), which is approximately 0.0254 millimeters.

The mil is widely used in industries like plastic film, coatings, wire diameter, and mechanical parts, where precise measurements of thin materials are necessary. It should not be confused with the millimeter, which is 0.001 meters or 1,000 microns — much larger than a mil.

Key points:

1 mil = 0.001 inch = 0.0254 mm
Used mainly for small thicknesses or diameters
Common in engineering, manufacturing, and material sciences
Not to be confused with millimeter (mm)

The mil remains an important unit in technical fields where fine measurement is critical.

Convert chain to mil Online | Free Length Converter

Popular Length Unit Conversions

Convert chain to Other Length Units