Btu (IT) per Hour per Square Foot [Btu(IT)/(h·ft²)]

The unit Btu (IT) per hour per square foot, written as Btu(IT)/(h·ft²), measures heat flux density or thermal power per unit area using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every hour.

This unit is widely used in U.S. building construction, insulation, HVAC, and solar energy studies to quantify energy transfer through walls, roofs, or floors. Typical applications include:

• 
  

  Heat loss or gain through building surfaces

  
  
• 
  

  Solar radiation incident on horizontal surfaces

  
  
• 
  

  Design and analysis of heating and cooling systems

  
  

Heat flux is mathematically expressed as:

where q is heat flux in Btu(IT)/(h·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in hours.

Conversion to SI units:

Although modern practice uses W/m², Btu(IT)/(h·ft²) remains prevalent in U.S. building codes, insulation tables, and historical thermal data, offering a convenient measure of energy transfer per square foot per hour.

Calorie (th) per Second per Square Centimeter [cal(th)/(s·cm²)]

The unit calorie (th) per second per square centimeter, written as cal(th)/(s·cm²), measures heat flux density or power per unit area using the thermochemical calorie (1 cal(th) = 4.184 J). It represents the amount of heat energy transferred through 1 cm² of surface every second.

This unit is commonly used in laboratory-scale heat transfer experiments, solar energy studies, and focused radiation applications, especially where the energy is concentrated over a small surface area. Applications include:

• 
  

  Solar radiation intensity measurements

  
  
• 
  

  Laser or concentrated light experiments

  
  
• 
  

  Calorimetry experiments on small samples

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in cal(th)/(s·cm²), Q is energy in calories, A is area in cm², and t is time in seconds.

Conversion to SI units:

While W/m² is the SI standard, cal(th)/(s·cm²) remains useful in laboratory and historical references, providing a practical measure for high-intensity, small-area heat transfer.