Btu (IT) per Hour per Square Foot [Btu(IT)/(h·ft²)]

The unit Btu (IT) per hour per square foot, written as Btu(IT)/(h·ft²), measures heat flux density or thermal power per unit area using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every hour.

This unit is widely used in U.S. building construction, insulation, HVAC, and solar energy studies to quantify energy transfer through walls, roofs, or floors. Typical applications include:

• 
  

  Heat loss or gain through building surfaces

  
  
• 
  

  Solar radiation incident on horizontal surfaces

  
  
• 
  

  Design and analysis of heating and cooling systems

  
  

Heat flux is mathematically expressed as:

where q is heat flux in Btu(IT)/(h·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in hours.

Conversion to SI units:

Although modern practice uses W/m², Btu(IT)/(h·ft²) remains prevalent in U.S. building codes, insulation tables, and historical thermal data, offering a convenient measure of energy transfer per square foot per hour.

Watt per Square Centimeter [W/cm²]

The unit watt per square centimeter (W/cm²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time, with the area measured in square centimeters. One watt equals 1 joule per second, so 1 W/cm² corresponds to 1 joule of energy passing through 1 cm² every second.

This unit is often used in high-intensity applications such as:

• 
  

  Laser systems measuring power density on a target

  
  
• 
  

  Plasma or arc discharge studies

  
  
• 
  

  Industrial thermal processes where energy is concentrated on small surfaces

  
  

The relationship can be expressed mathematically as:

where q is heat flux in W/cm², Q is energy in joules, A is area in cm², and t is time in seconds.

Conversion to SI units:

While W/m² is the standard SI unit for most applications, W/cm² is convenient for small-area, high-intensity measurements, such as in laboratory-scale experiments, laser technology, and materials testing, where energy is concentrated over very small surfaces.