Kilowatt per Square Meter [kW/m²]

The unit kilowatt per square meter (kW/m²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time, scaled to kilowatts. One kilowatt equals 1000 watts, so 1 kW/m² = 1000 J of energy passing through 1 square meter every second.

This unit is widely used in solar energy, fire safety engineering, and high-intensity thermal applications to quantify power delivered per area. Typical applications include:

• 
  

  Solar concentrators and photovoltaic panels: assessing the intensity of sunlight on a surface

  
  
• 
  

  Fire testing: measuring heat flux from flames or radiative heaters

  
  
• 
  

  Industrial processes: calculating energy input in furnaces or reactors

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kW/m², Q is energy in kilojoules, A is area in square meters, and t is time in seconds.

For reference, direct sunlight at noon on a clear day provides roughly 1 kW/m² at the Earth’s surface.

kW/m² is an SI-derived unit and is convenient for large-scale energy calculations, replacing older units like Btu/ft²·h or cal/cm²·s. It provides a straightforward way to assess power per unit area in engineering and environmental applications.

Calorie (th) per Hour per Square Centimeter [cal(th)/(h·cm²)]

The unit calorie (th) per hour per square centimeter, written as cal(th)/(h·cm²), measures heat flux density or thermal power per unit area using the thermochemical calorie (1 cal(th) = 4.184 J). It represents the amount of heat energy transferred through 1 cm² of surface in 1 hour.

This unit is often used in solar energy studies, calorimetry experiments, and building physics, especially when small surface areas and long durations are considered. Typical applications include:

• 
  

  Solar radiation incident on small surfaces

  
  
• 
  

  Thermal testing of materials over time

  
  
• 
  

  Calorimetry experiments

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in cal(th)/(h·cm²), Q is energy in calories, A is area in cm², and t is time in hours.

Conversion to SI units:

While SI units such as W/m² are standard, cal(th)/(h·cm²) remains convenient in small-scale laboratory and historical studies, providing an intuitive way to quantify energy transfer per hour per unit area.