Kilowatt per Square Meter [kW/m²]

The unit kilowatt per square meter (kW/m²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time, scaled to kilowatts. One kilowatt equals 1000 watts, so 1 kW/m² = 1000 J of energy passing through 1 square meter every second.

This unit is widely used in solar energy, fire safety engineering, and high-intensity thermal applications to quantify power delivered per area. Typical applications include:

• 
  

  Solar concentrators and photovoltaic panels: assessing the intensity of sunlight on a surface

  
  
• 
  

  Fire testing: measuring heat flux from flames or radiative heaters

  
  
• 
  

  Industrial processes: calculating energy input in furnaces or reactors

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kW/m², Q is energy in kilojoules, A is area in square meters, and t is time in seconds.

For reference, direct sunlight at noon on a clear day provides roughly 1 kW/m² at the Earth’s surface.

kW/m² is an SI-derived unit and is convenient for large-scale energy calculations, replacing older units like Btu/ft²·h or cal/cm²·s. It provides a straightforward way to assess power per unit area in engineering and environmental applications.

Calorie (th) per Second per Square Centimeter [cal(th)/(s·cm²)]

The unit calorie (th) per second per square centimeter, written as cal(th)/(s·cm²), measures heat flux density or power per unit area using the thermochemical calorie (1 cal(th) = 4.184 J). It represents the amount of heat energy transferred through 1 cm² of surface every second.

This unit is commonly used in laboratory-scale heat transfer experiments, solar energy studies, and focused radiation applications, especially where the energy is concentrated over a small surface area. Applications include:

• 
  

  Solar radiation intensity measurements

  
  
• 
  

  Laser or concentrated light experiments

  
  
• 
  

  Calorimetry experiments on small samples

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in cal(th)/(s·cm²), Q is energy in calories, A is area in cm², and t is time in seconds.

Conversion to SI units:

While W/m² is the SI standard, cal(th)/(s·cm²) remains useful in laboratory and historical references, providing a practical measure for high-intensity, small-area heat transfer.