Foot-Pound per Minute per Square Foot [ft·lb/(min·ft²)]

The unit foot-pound per minute per square foot, written as ft·lb/(min·ft²), measures energy flux density or power per unit area in the Imperial system. One foot-pound (ft·lb) is the energy required to move a force of 1 pound-force over a distance of 1 foot, equivalent to 1 ft·lb ≈ 1.35582 joules. Dividing by time (minutes) and area (ft²) gives the rate of energy transfer per unit area over time.

This unit is commonly used in U.S.-based engineering, building physics, and solar energy studies where energy flux through surfaces is measured. Applications include:

• 
  

  Heat transfer through walls, floors, or roofs

  
  
• 
  

  Solar radiation incident on building surfaces

  
  
• 
  

  Mechanical or thermal energy flux in industrial processes

  
  

Mathematically, the flux is expressed as:

where q is flux in ft·lb/(min·ft²), E is energy in foot-pounds, A is area in ft², and t is time in minutes.

Conversion to SI units:

While modern practice favors W/m², ft·lb/(min·ft²) remains relevant in legacy U.S. building and thermal engineering literature, providing an intuitive measure of energy transfer per square foot per minute.

Btu (IT) per Minute per Square Foot [Btu(IT)/(min·ft²)]

The unit Btu (IT) per minute per square foot, written as Btu(IT)/(min·ft²), measures heat flux density or thermal power per unit area using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every minute.

This unit is commonly used in U.S. building engineering, solar energy studies, and thermal analysis where energy flux per unit area over longer periods is considered. Typical applications include:

• 
  

  Heat loss or gain through building walls, roofs, and floors

  
  
• 
  

  Solar radiation incident on panels or horizontal surfaces

  
  
• 
  

  Industrial heating or cooling rate analysis

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in Btu(IT)/(min·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in minutes.

Conversion to SI units:

While SI units such as W/m² are now standard, Btu(IT)/(min·ft²) remains convenient in U.S. engineering and historical thermal literature, providing an intuitive measure of heat transfer per square foot per minute.