Watt per Square Meter [W/m²]

The unit watt per square meter (W/m²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time. One watt equals 1 joule per second, so 1 W/m² corresponds to 1 joule of energy passing through 1 square meter every second.

This unit is widely used in physics, engineering, meteorology, and solar energy studies to quantify energy transfer rates across surfaces. Examples of applications include:

• 
  

  Solar radiation: measuring sunlight incident on a surface

  
  
• 
  

  Heat transfer: quantifying conduction or convection per unit area

  
  
• 
  

  Building energy analysis: evaluating heat gain or loss through walls and roofs

  
  

Mathematically, the heat flux is expressed as:

where q is heat flux in W/m², Q is energy in joules, A is area in square meters, and t is time in seconds.

For example, solar constant at Earth’s surface is approximately 1361 W/m², indicating the power received per square meter from the Sun outside Earth’s atmosphere.

W/m² is the standard SI unit for energy flux density, replacing older units like cal/cm²·s or Btu/ft²·h, and is essential for thermal engineering, climatology, and renewable energy calculations.

Btu (IT) per Second per Square Foot [Btu(IT)/(s·ft²)]

The unit Btu (IT) per second per square foot, written as Btu(IT)/(s·ft²), measures heat flux density or thermal power per unit area in the Imperial system using the International Table British Thermal Unit (1 Btu(IT) = 1055.06 J). It represents the amount of heat energy transferred through 1 square foot of surface every second.

This unit is commonly used in high-intensity heat transfer applications, solar energy studies, and engineering where energy flux per small surface area is important. Typical applications include:

• 
  

  Heat flux from industrial furnaces or heaters

  
  
• 
  

  Solar radiation incident on small surfaces

  
  
• 
  

  Thermal testing of materials

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in Btu(IT)/(s·ft²), Q is energy in Btu(IT), A is area in ft², and t is time in seconds.

Conversion to SI units:

While W/m² is the SI standard, Btu(IT)/(s·ft²) is convenient in U.S. engineering and historical references, providing an intuitive measure of high-intensity heat flux per square foot per second.