Watt per Square Meter [W/m²]

The unit watt per square meter (W/m²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time. One watt equals 1 joule per second, so 1 W/m² corresponds to 1 joule of energy passing through 1 square meter every second.

This unit is widely used in physics, engineering, meteorology, and solar energy studies to quantify energy transfer rates across surfaces. Examples of applications include:

• 
  

  Solar radiation: measuring sunlight incident on a surface

  
  
• 
  

  Heat transfer: quantifying conduction or convection per unit area

  
  
• 
  

  Building energy analysis: evaluating heat gain or loss through walls and roofs

  
  

Mathematically, the heat flux is expressed as:

where q is heat flux in W/m², Q is energy in joules, A is area in square meters, and t is time in seconds.

For example, solar constant at Earth’s surface is approximately 1361 W/m², indicating the power received per square meter from the Sun outside Earth’s atmosphere.

W/m² is the standard SI unit for energy flux density, replacing older units like cal/cm²·s or Btu/ft²·h, and is essential for thermal engineering, climatology, and renewable energy calculations.

Calorie (th) per Minute per Square Centimeter [cal(th)/(min·cm²)]

The unit calorie (th) per minute per square centimeter, written as cal(th)/(min·cm²), measures heat flux density or thermal power per unit area using the thermochemical calorie (1 cal(th) = 4.184 J). It represents the amount of heat energy transferred through 1 cm² of surface every minute.

This unit is often used in laboratory experiments, solar energy studies, and material testing, particularly when small surfaces and longer exposure times are involved. Applications include:

• 
  

  Solar radiation measurements on small panels or surfaces

  
  
• 
  

  Thermal testing of materials over extended periods

  
  
• 
  

  Calorimetry experiments on small samples

  
  

Mathematically, the heat flux is expressed as:

where q is heat flux in cal(th)/(min·cm²), Q is energy in calories, A is area in cm², and t is time in minutes.

Conversion to SI units:

Although SI units such as W/m² are standard, cal(th)/(min·cm²) remains useful in historical calorimetry, laboratory experiments, and solar radiation studies, providing an intuitive measure of energy transfer per minute per small surface area.