Convert acre-foot/hour [ac*ft/h] to cubic meter/hour [m^3/h] Online | Free flow Converter

Hour [ac·ft/h]

Acre-foot per hour [ac·ft/h] is a unit of volumetric flow rate commonly used in hydrology, irrigation, and water resource engineering. One acre-foot represents the volume of water needed to cover one acre of land to a depth of one foot, approximately 1,233 cubic meters or 325,851 gallons. When expressed per hour, ac·ft/h measures the water volume delivered, consumed, or flowing through a system within a single hour. This unit is particularly useful for managing high-capacity water distribution systems, including canals, reservoirs, and municipal or industrial supply networks, where monitoring short-term flow is essential. For example, a hydroelectric dam releasing 10 ac·ft/h discharges enough water to cover ten acres to a depth of one foot every hour, assisting operators in controlling water levels and power generation. It is also applied in flood control, irrigation scheduling, and industrial water use where precise flow rates are critical. Compared to ac·ft/d or ac·ft/y, acre-foot per hour provides finer temporal resolution, allowing for rapid adjustments and better system management. Using ac·ft/h enables engineers and water managers to monitor, regulate, and optimize water flow, ensuring efficiency, safety, and sustainability in diverse water resource applications.

Cubic Meter/Hour [m³/h]

Cubic meter per hour (m³/h) is a unit of volumetric flow rate used to measure the volume of a fluid—liquid or gas—passing through a system over one hour. One cubic meter represents a cube with sides of one meter, so m³/h indicates how many such cubic meters flow per hour. This unit is widely used in industrial processes, water supply systems, HVAC applications, and chemical engineering to monitor and control fluid movement. For example, in water treatment plants, pumps and pipelines are often rated in m³/h to ensure the correct volume of water is delivered or treated each hour. In industrial manufacturing, m³/h helps regulate the flow of liquids or gases in processes such as cooling, chemical mixing, or fuel supply. Compared to m³/s, this unit is more suitable for operations where flow is measured on an hourly basis, providing a practical perspective on medium-term fluid transport. Using cubic meters per hour allows engineers and operators to design efficient systems, prevent overloading, and optimize resource use, ensuring smooth operation and accurate monitoring of fluid-based systems across residential, commercial, and industrial sectors.