Kilocalorie (IT) per Hour per Square Foot [kcal(IT)/(h·ft²)]

The unit kilocalorie (IT) per hour per square foot, written as kcal(IT)/(h·ft²), measures heat flux density or thermal power per unit area using the International Table kilocalorie (1 kcal(IT) = 4186.8 J). It represents the amount of heat energy transferred through 1 square foot of surface in 1 hour.

This unit is commonly used in U.S.-based building construction, insulation, and HVAC studies to quantify energy transfer through walls, floors, or roofs. Typical applications include:

• 
  

  Heat loss or gain through building materials

  
  
• 
  

  Solar energy incident on rooftops or horizontal surfaces

  
  
• 
  

  Design and analysis of heating and cooling systems

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kcal(IT)/(h·ft²), Q is total heat in kilocalories, A is area in ft², and t is time in hours.

Conversion to SI units:

While modern practice uses W/m², kcal(IT)/(h·ft²) remains prevalent in legacy U.S. building and insulation data, offering a convenient way to evaluate thermal energy transfer over a typical hourly timescale.

Calorie (th) per Second per Square Centimeter [cal(th)/(s·cm²)]

The unit calorie (th) per second per square centimeter, written as cal(th)/(s·cm²), measures heat flux density or power per unit area using the thermochemical calorie (1 cal(th) = 4.184 J). It represents the amount of heat energy transferred through 1 cm² of surface every second.

This unit is commonly used in laboratory-scale heat transfer experiments, solar energy studies, and focused radiation applications, especially where the energy is concentrated over a small surface area. Applications include:

• 
  

  Solar radiation intensity measurements

  
  
• 
  

  Laser or concentrated light experiments

  
  
• 
  

  Calorimetry experiments on small samples

  
  

Heat flux can be expressed mathematically as:

where q is heat flux in cal(th)/(s·cm²), Q is energy in calories, A is area in cm², and t is time in seconds.

Conversion to SI units:

While W/m² is the SI standard, cal(th)/(s·cm²) remains useful in laboratory and historical references, providing a practical measure for high-intensity, small-area heat transfer.