Kilocalorie (IT) per Hour per Square Foot [kcal(IT)/(h·ft²)]

The unit kilocalorie (IT) per hour per square foot, written as kcal(IT)/(h·ft²), measures heat flux density or thermal power per unit area using the International Table kilocalorie (1 kcal(IT) = 4186.8 J). It represents the amount of heat energy transferred through 1 square foot of surface in 1 hour.

This unit is commonly used in U.S.-based building construction, insulation, and HVAC studies to quantify energy transfer through walls, floors, or roofs. Typical applications include:

• 
  

  Heat loss or gain through building materials

  
  
• 
  

  Solar energy incident on rooftops or horizontal surfaces

  
  
• 
  

  Design and analysis of heating and cooling systems

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kcal(IT)/(h·ft²), Q is total heat in kilocalories, A is area in ft², and t is time in hours.

Conversion to SI units:

While modern practice uses W/m², kcal(IT)/(h·ft²) remains prevalent in legacy U.S. building and insulation data, offering a convenient way to evaluate thermal energy transfer over a typical hourly timescale.

Kilowatt per Square Meter [kW/m²]

The unit kilowatt per square meter (kW/m²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time, scaled to kilowatts. One kilowatt equals 1000 watts, so 1 kW/m² = 1000 J of energy passing through 1 square meter every second.

This unit is widely used in solar energy, fire safety engineering, and high-intensity thermal applications to quantify power delivered per area. Typical applications include:

• 
  

  Solar concentrators and photovoltaic panels: assessing the intensity of sunlight on a surface

  
  
• 
  

  Fire testing: measuring heat flux from flames or radiative heaters

  
  
• 
  

  Industrial processes: calculating energy input in furnaces or reactors

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kW/m², Q is energy in kilojoules, A is area in square meters, and t is time in seconds.

For reference, direct sunlight at noon on a clear day provides roughly 1 kW/m² at the Earth’s surface.

kW/m² is an SI-derived unit and is convenient for large-scale energy calculations, replacing older units like Btu/ft²·h or cal/cm²·s. It provides a straightforward way to assess power per unit area in engineering and environmental applications.