Kilocalorie (IT) per Hour per Square Foot [kcal(IT)/(h·ft²)]

The unit kilocalorie (IT) per hour per square foot, written as kcal(IT)/(h·ft²), measures heat flux density or thermal power per unit area using the International Table kilocalorie (1 kcal(IT) = 4186.8 J). It represents the amount of heat energy transferred through 1 square foot of surface in 1 hour.

This unit is commonly used in U.S.-based building construction, insulation, and HVAC studies to quantify energy transfer through walls, floors, or roofs. Typical applications include:

• 
  

  Heat loss or gain through building materials

  
  
• 
  

  Solar energy incident on rooftops or horizontal surfaces

  
  
• 
  

  Design and analysis of heating and cooling systems

  
  

Mathematically, heat flux is expressed as:

where q is heat flux in kcal(IT)/(h·ft²), Q is total heat in kilocalories, A is area in ft², and t is time in hours.

Conversion to SI units:

While modern practice uses W/m², kcal(IT)/(h·ft²) remains prevalent in legacy U.S. building and insulation data, offering a convenient way to evaluate thermal energy transfer over a typical hourly timescale.

Watt per Square Centimeter [W/cm²]

The unit watt per square centimeter (W/cm²) measures heat flux density or radiant flux, representing the amount of energy transferred per unit area per unit time, with the area measured in square centimeters. One watt equals 1 joule per second, so 1 W/cm² corresponds to 1 joule of energy passing through 1 cm² every second.

This unit is often used in high-intensity applications such as:

• 
  

  Laser systems measuring power density on a target

  
  
• 
  

  Plasma or arc discharge studies

  
  
• 
  

  Industrial thermal processes where energy is concentrated on small surfaces

  
  

The relationship can be expressed mathematically as:

where q is heat flux in W/cm², Q is energy in joules, A is area in cm², and t is time in seconds.

Conversion to SI units:

While W/m² is the standard SI unit for most applications, W/cm² is convenient for small-area, high-intensity measurements, such as in laboratory-scale experiments, laser technology, and materials testing, where energy is concentrated over very small surfaces.